SWIFTVISION II Single Optical Tablet Counting Machine for Sale

Swiftvision Ii Single Optical Tablet Counting Machine

Design Speed: Up To 50 Bpm
Single Head Swiftpack Swiftvision Ii 12 Track
Optical Electronic Tablet Counting Machine

********MACHINE ONLY**********

Pharmaceutical grade electronic tablet counter model number Swiftvision II (single). This machine is designed to electronically count products into predetermined quantities. Product is fed from a bulk product hopper and separated using an advanced feed system with integrated "preweigh" system. Product will then fall through an array of infra-red sensors and be deposited into awaiting containers via a discharge chute and filling nozzle.

The machine will consist of the following items:
o Twelve "V" tracks at a pitch of 35mm
o Twelve track sensing system
o Is available as a standard in either 220v or
240v/1ph/50Hz, or 110v/1ph/60Hz - if alternative
voltages are required these should be requested prior to placing order (Swiftpack requires details of customers power supply to allow order to proceed)

o 27 litre hopper manufactured in 316L stainless steel,
polished to a mirror finish
o Single discharge point
o Vibrating filling nozzle assembly
o Three off spun stainless steel filling nozzles with minimum
20mm opening (IMA Swiftpack to be informed of
container sizes to enable these to be cut to suit)
o Powerlift arrangement
o Blanking plate in hole for connection for Swiftlift at rear of machine (Connection not fitted)
o Right hand touchscreen control panel, when viewed from front of machine (unless requested to be changed by the customer)
o 32 pin connection plug at front of machine for external connection (not a separate terminal box)
o Three stack beacon assembly
Green constant - machine running
Amber flashing - low product in hopper
Red constant - Alarm

Service requirements:
Electrical Supply 2Kw
Air Supply 110 litre/minute @ 6 bar

Machine is built to conform to the cGMP standards, using approved materials for the Pharmaceutical industry, generally the fabrication being in 316L Stainless Steel.

For a standard machine:
(Any products outside this range needs to be evaluated prior to offer being made, all Dimensions are based on a 915mm floor to conveyor slat height)
o Maximum container size - external diameter 100mm x 200mm high with minimum internal neck diameter of 45mm

Additional Prep Fees May Apply